TVR Sagaris 4.0 L
2005
Coupe
Deixe seu feedback
Nota média / 5. Total de votos:
Sem votos! Seja o primeiro
The Sagaris made its debut at the MPH03 Auto Show in 2003. The pre-production model was then shown at the 2004 Birmingham Motor Show. In 2005, the production model was released for public sale at TVR dealerships around the world. Based on the TVR T350,[1] the Sagaris was designed with endurance racing in mind. The multitude of air vents, intake openings, and other features on the bodywork allow the car to be driven for extended periods of time…
The Sagaris made its debut at the MPH03 Auto Show in 2003. The pre-production model was then shown at the 2004 Birmingham Motor Show. In 2005, the production model was released for public sale at TVR dealerships around the world. Based on the TVR T350,[1] the Sagaris was designed with endurance racing in mind. The multitude of air vents, intake openings, and other features on the bodywork allow the car to be driven for extended periods of time on race tracks with no modifications required for cooling and ventilation. The final production model came with several variations from the pre-production show models, e.g. the vents on the wings are not cut out, different wing mirrors, location of the fuel filler, and bonnet hinges (along with other variations).
As with all TVRs of the 1990s and early 2000s, the Sagaris ignores the European Union guideline that all new cars should be fitted with ABS and at least front airbags, because Peter Wheeler believed that such devices promote overconfidence and risk the life of a driver in the event of a rollover—which TVRs are engineered to resist.[2] It also eschews electronic driver’s aids (such as traction control or electronic stability control), leading Malcolm Thorne of Classic & Sports Car magazine to observe that although “far less intimidating than you might expect, in the wet it sends a prickle of trepidation down your spine”.[3] Thorne nonetheless summed up the TVR as “stunning”.
The car’s name comes from the sagaris, the Greek name of a lightweight battle-axe used by the Scythians, which was feared for its ability to penetrate the armour of their enemies. The car was designed by Graham Browne.
Daniel Boardman, the Chief Engineer involved in the Sagaris project, was frustrated with well-known TVR quality issues, such as water ingress, carpets coming unstuck, and tricky handling. Boardman spent considerable time ensuring the Sagaris was engineered properly from the start. The suspension was designed to eliminate bump-steer, the dampers were tuned with input from the Bilstein and Multimatic, the bonnet was redesigned to work as well as any conventional steel bonnet, and door seals were meticulously checked to ensure no water ingress. Motoring journalist Jeremy Clarkson described the resulting product as “the best TVR ever made”.[4]
In 2008, TVR unveiled the Sagaris 2, which was designed to replace the original Sagaris. The prototype had minor changes to the original car, including a revised rear fascia and exhaust system, and modifications to the interior.[5]
A company called Grex Automotive acquired the forms and tools after TVR’s bankruptcy. In 2018, they made the TVR Sagaris available to buy as a kit car.[6] Only ten examples were planned, and the engine and transmission choice were up to the buyers.[6]
Deixe seu feedback
Nota média / 5. Total de votos:
Sem votos! Seja o primeiro